Cisco 350-080 Practice Exam Questions and Answers Sample Papers Shared By Braindump2go (201-210)

CISCIO NEW UPDATED: New Updated 350-080 Exam Questions from Braindump2go 350-080 PDF Dumps and 350-080 VCE Dumps! Welcome to Download the Newest Braindump2go 350-080 VCE&PDF Dumps: http://www.braindump2go.com/350-080.html (394 Q&As)

2015 Timesaving Comprehensive Guides For Cisco 350-080 Exam: Using Latst Released Braindump2go 350-080 Practice Tests Questions, Quickly Pass 350-080 Exam 100%! Following Questions and Answers are all the New Published By Cisco Official Exam Center!

Vendor: Cisco
Exam Code: 350-080
Exam Name: CCIE Data Center Written Exam

350-080 Dumps,350-080 Exam Dumps,350-080 Brainfump,350-080 Questions,350-080 VCE,350-080 PDF,350-080 Actual Test,350-080 Study Guide,350-080 Book,350-080 CCIE Data Center Written Exam,350-080 Test


QUESTION 201
Refer to the exhibit. While attempting to modify a management firmware package, you receive the error that is shown in the exhibit. Which two statements explain this error? (Choose two.)

A.    The management firmware package that is referenced by the service profile has been deleted.
B.    The Cisco UCS Manager version is 2.1 or later.
C.    Cisco Integrated Management Controller firmware should be managed via the host firmware policy.
D.    You cannot modify the management firmware directly when a policy has been assigned.
E.    The user that is logged into Cisco UCS Manager does not have sufficient privileges.

Answer: BC

QUESTION 202
Drag and Drop Question

Answer:

QUESTION 203
Drag and Drop Question

Answer:

QUESTION 204
Refer to the exhibit. When the engineer tried to check CoPP on the switch, the engineer observed the error that is shown in the exhibit. Which option describes the reason for the displayed output?


A.    The Cisco NX-OS version that is running does not support CoPP.
B.    The CoPP feature is not enabled on this switch.
C.    The CoPP CLI is available from the default VDC.
D.    CoPP is enabled by default but not configured.

Answer: C

QUESTION 205
How many ACL capture sessions can be configured on a Cisco Nexus 7000 switch?

A.    ACL capture is not supported on the Cisco Nexus 7000 switch.
B.    Only one ACL capture session can be active at any given time in the system across virtual device contexts.
C.    Only one ACL capture session can be active in each virtual device context.
D.    The number of ACL capture sessions depends on the space that is available within the ACL Ternary Content Addressable Memory.
E.    Only one ACL capture session is supported per VLAN.

Answer: B

QUESTION 206
On a Cisco Nexus 7000 device, on which port type can port security be configured?

A.    Access ports
B.    SPAN destination port
C.    trunk ports
D.    public VLAN-enabled ports

Answer: A

QUESTION 207
Which statement is true about DHCP snooping on the Cisco Nexus 7000 platform?

A.    DHCP snooping cannot be enabled globally and on a per-VLAN basis.
B.    By default, DHCP snooping is disabled globally and on all VLANs.
C.    You can enable DHCP snooping on a single VLAN only.
D.    For DHCP snooping to function properly, all DHCP servers must be connected to the device through untrusted interfaces.

Answer: B

QUESTION 208
Which two statements about VDC configuration and limitations are true? (Choose two.)

A.    Standard VDCs cannot share interfaces, VLANs, or VRF tables.
B.    Any user can create VDCs.
C.    Only the network administrator role can use the switchto vdc command.
D.    After a network administrator uses the switchto vdc command, the network administrator becomes a VDC administrator for the new VDC.
E.    There is no CLI command to return to the original VDC.

Answer: AD

QUESTION 209
Refer to the exhibit. You configured a port on a Cisco Nexus 7000 switch as a trunk port. Which VLANs are allowed on the trunk port based on the port configuration in the exhibit?

A.    No VLANs are allowed by default. Use the switchport trunk allowed vlan 1-4094 command to allow all VLANs.
B.    Only Native VLAN 1 will be allowed.
C.    VLANs 1 to 3967, and 4048 to 4094 are allowed.
D.    VLANs 1 to 3900, and 4048 to 4094 are allowed.
E.    VLANs 1 to 4094 are allowed.

Answer: C

QUESTION 210
Which three prerequisites must be met before configuring FabricPath on a Cisco Nexus 7000 switch? (Choose three.)

A.    Ensure that the Enhanced Layer 2 license is installed on the switch.
B.    The FabricPath feature set must be installed on the default and non-default VDCs.
C.    Spanning tree must be disabled on the switch.
D.    Ensure that you are working on the F Series module.
E.    Ensure that you are working on the M Series module.
F.    The FabricPath feature set must be installed only on the default VDC.

Answer: ABD


Braindump2go Promise All 350-080 Questions and Answers are the Latest Updated,we aim to provide latest and guaranteed questions for all certifications.You just need to be braved in trying then we will help you arrange all left things! 100% Pass All Exams you want Or Full Money Back! Do yo want to have a try on passing 350-080?

FREE DOWNLOAD: NEW UPDATED 350-080 PDF Dumps & 350-080 VCE Dumps from Braindump2go: http://www.braindump2go.com/350-080.html (394 Q&A)

         

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back